Amada ML-73 EL Series, Operation Manual, Page: 73 / 138

Chapter
9
69
ML-73
□□
EL
9.5 Commands
(26) SVV (Variable save to memory card)
Save the variable data developed on RAM to the memory card.
(27) TRB (Error code acquisition)
Clear the current error.
(28) TRB (Error code acquisition)
Obtain all current error codes. (For detailed information, refer to the manual for LMDraw6.)
(29) COR/COW (Status)
Obtain (Read) the current status.
Also used to write to switch to auto status transmission.
■
Read (COR)
■
Write (COW t0, t1, t2, t3)
Computer ->
Marker
: SVV
Computer ->
Marker
: ERR
Example
If LD current and layout command errors have occurred
Computer ->
Marker
: TRB
Marker ->
Computer
: 11, 31
When multiple errors have occurred, all error codes are returned, delimited by commas.
(Error codes are not sent in ascending order by error code number.)
If no error occurs, only STX, ETX, and checksum are returned.
Computer ->
Marker
: COR
Marker ->
Computer
: S0, S1, S2, S3
S0 Ready to mark 0: Not ready 1: Ready
S1
End of marking
(Once 1 (finished) is sent, the
status will be indicated as 0
(unfinished).)
0: Marking not finished 1: Marking finished
S2 Safety shutter 0: Shutter OFF 1: Shutter ON
S3 Error 0: Normal 1: Error
Example
When switching to auto transmission of all items
Computer ->
Marker
: 1, 1, 1, 1