Amada ML-73 EL Series, Operation Manual, Page: 21 / 138

Chapter
3
17
ML-73
□□
EL
3.1 Control Unit
③
Panel Indicators
Panel indicators light in accordance with the status of the unit as follows:
④
POWER Switch
Turn to the ON position to supply power.
Turn to the OFF position to cut the power supply and stop the unit.
⑤
Control Key Switch
Turn the key switch ON to prepare the LD.
Turn OFF to deactivate the LD.
⑥
Memory Card Access Indicator
Remains lit during memory card access.
⑦
Front Cover
An air filter and the memory card slot are located behind this cover.
Clean the air filter at regular intervals. (Refer to 12.3 "Air Filter Inspection and Replacement" (p.
122).)
The memory card loads and saves marking data.
Insert a memory card to prepare the marker for use.
READY The CONTROL keyswitch is turned on and the LD can be operated.
SHUTTER The Safety Shutter in the Head Unit is open.
EMISSION Laser emission underway
TROUBLE An error occurred.
Do not turn OFF the power switch when the Memory Card Access indicator is lit.
Turning OFF the power switch when the indicator is lit may result in data loss or
unreadable memory cards.
Always turn OFF the power switch before inserting or removing memory cards.
If the power switch is on when cards are inserted or removed, data may be lost or the
memory card may be rendered unusable.
We recommend backing up your data at periodic intervals to prevent data loss.
(Refer to 12.7 "Memory Card Management" (p. 128).)
Use only the specified memory cards.
Use of non-specified commercial cards may result in aberrant function.