Amada ML-73 EL Series, Operation Manual, Page: 61 / 138

Chapter
9
57
ML-73
□□
EL
9.5 Commands
The commands are listed below.
The first three characters of a command segment signify specific command itself.
9.5 Commands
Command Function details
Read Write Parameter
Setting increment/
details
CUR CUW
Laser beam
Current 0.1A
LOR LOW Current offset 1%
SPR SPW Marking speed 0.01 mm/s
PUR PUW Frequency 0.1 kHz
RTR RTW
X and Y axes
Axial rotation angle 0.000001 °
XOR XOW X-axis offset 1 µm
YOR YOW Y-axis offset 1 µm
XYR XYW
X-axis offset
Y-axis offset
Axial rotation angle
1 µm
1 µm
0.000001 °
LMR LMW
Laser control
Laser start
0: OFF
1: ON
MSR MSW Marking start
0: End
1: Marking in progress
GLR GLW Guide beam
0: OFF
1: ON
LNR LNW
Layout number
selection
Layout number
RLR RLW
Toggle local/external
control
0: Local (internal)
1: Remote (external)
SRR SRW
Marking data
Serial Serial number
VDR VDW Variable data Variable number
VCW
Variable data
continuous change
Variable number
MRR MRW Marking data Layout number
DMR DMW
Number of cells of
DataMatrix, Cell part
setting
“Number of cells”
number, Part number
ARD Matrix skip Matrix number
LNS
Layout selection
(Filename designation)
Filename
MRS
Layout binary
registration
GNS Part no. searching Filename
GRS Part binary registration