Amada ML-73 EL Series, Operation Manual, Page: 27 / 138

Chapter
3
23
ML-73
□□
EL
3.2 Head Unit
③
Fiber
Optical fiber that connects the laser output to the Laser head. Never allow the fiber bending radius to
decrease to less than 150 mm. Never kink or crush the fiber. Fiber damage will require
refurbishment of the laser module or unit. The fiber is shipped installed and aligned in our factory.
The fiber output assembly can not be removed and replaced except in our factory. Some alignment
may be required if the laser module is removed and reinstalled in the head.
④
Scanner Power Connector
This 5-pin round-type cable contains power for the scanner. Do not plug or unplug this connector
when power is ON.