Amada ML-73 EL Series, Operation Manual, Page: 43 / 138

Chapter
7
39
ML-73
□□
EL
7.1 Turning the Hardware On and Off
■
Stopping the Marker
1
Select [Marker]-[Stop LD] or click the
icon.
After the LD has finished shutting down, the Ready indicator on the Control Unit goes off.
The [Start LD] indicator on the marking screen turns off.
2
On the Control Unit, turn off the Control keyswitch.
The LD is deactivated, and the [Key Switch] indicator on the marking screen turns off.
3
To bring the Control Unit offline, either select [Marker]-[Offline] or click the icon.
4
On the Control Unit, turn off the Power switch.
The Control Unit power indicator turns off.
5
Turn off the leakage breaker at the back of the Control Unit.
Marker shutdown is now complete.
• Do not turn off the Power switch until the Ready indicator on the Control Unit goes
off. The useful life of the LD will be greatly shortened if you turn off the Power switch
during cooldown. Doing so may also result in the loss of data on the memory card,
preventing the unit from restarting.
• Do not turn off the Power switch while the [Online] indicator is active on the marking
screen of LMDraw6. If you turn off the Power switch while the [Online] indicator is
active, memory card data may be lost and the unit may not be able to start.
• If a computer is connected, it will continue to access the Control Unit memory card
for about 15 seconds after it has gone offline. During this time, do not turn off the
Power switch.
• If a computer is connected, never unplug the USB cable until after going offline.