Amada ML-73 EL Series, Operation Manual, Page: 70 / 138

Chapter
9
66
ML-73
□□
EL
Chapter 9 Serial Interface Specifications
[How to register the part No.]
Only one part can be set in the marker as “Default” on the barcode setting dialog box for L
shape symbol, cell and margin parts, respectively. Therefore, the part to switch needs to be
transferred to the marker in advance as follows.
1 Import an image file.
2 Set a part in the color palette setting screen.
3 Save the layout which the image file is imported in, and transfer it.
4 You can call up the part set in step 2.
[How to get the part No. by filename]
Get the part No. by part filename with GNS command.
t0: Part filename (Designates the whole registered filename that includes the extension
“.SMB.” )
When the specified part file has not been registered, the part No. is not changed and NAK is
replied. When the two or more numbers are registered for a part filename, the number detected
first is replied.
(19) ARD (Matrix skip) NOTE: Cannot be executed during marking.
Skip a part of matrix.
The matrix skipped by this function is returned after marked. This function can be operated
separately from the matrix delete function of LMDraw6.
■
Write (ARDnn,mm...)
nn: Layout number
mm: Specified matrix number
(20) LNS (Layout selection (filename designation))
Selects the layout by filename.
t0:Filename (Designates the whole registered filename that includes the extension “.LMB.” )
･
The number of registrable parts is up to 16 due to limit of the BMP color palette.
･
When this function is used, the BMP marking function cannot be used. For how to
import image files, refer to the manual for LMDraw6.
Computer ->
Marker
: GNS t0
Example
When getting the part No. of “ GNSKURO-1.SMB .”
Computer -> Marker : GNSKURO-1.SMB
Marker -> Computer : 20002
Example
When deleting matrix indexes 1,4,5,6,7,100,120,121 of Layout No. 2
Computer ->
Marker
: ARD2,1,4-7,100,120,121: ARD2,1,4-7,100,121,121
When matrix indexes are continuing, use minus (0x2D) instead of comma (0x2c).
Specify smaller numbers first.
Computer ->
Marker
: LNS t0