Chapter
12
122
ML-73
□□
EL
Chapter
12
Maintenance
Always inspect the air filter of the Control Unit starting the equipment.
If it is dusty, vacuum it. Every 1 to 6 months, remove the air filter and wash it with a mild detergent. (The
filter may become dirtier in some operating environments.)
12.3.1 Control Unit
1
Check that the power of equipment is turned off.
2
Loosen the thumb screws to remove the
air filter cover.
3
Install a new or clean air filter (2 types) in
the equipment.
4
Return the air filter cover on the equipment front, then secure the thumb screws.
12.3Air Filter Inspection and Replacement
Dirty air filter will increase the internal temperature, which may in turn damage the equipment.
Keep the filter clean.
Thumb screws
Air filter
(for internal side)
Air filter
(for external side)
Summary of Contents for ML-73 EL Series
Page 1: ...Z11OM1209102 02 Fiber Laser Marker ML 73 EL OPERATION MANUAL Original instructions...
Page 4: ......
Page 133: ...Appendix...