Chapter
11
103
ML-73
□□
EL
11.3 Carriage Control Input and Output (AXIS. I/O)
Automating marking tasks by introducing laser markers requires an interface that can be smoothly
integrated with the production lines.
This section describes the optional carriage control interface function, a function available with this
system to meet such customer needs.
The carriage control interface function allows entry of not only layout data, but data for controlling
external equipment from a human-machine interface PC. Further, these control signals can be
interfaced as digital I/Os.
11.3 Carriage Control Input and Output (AXIS. I/O)
When using the AXIS. I/O connector, attach the ferrite core supplied to the multi-axis
control card on the marker side as shown below.
Applicable outer diameter of cable:
φ
13.0 mm max
If the ferrite core is not attached, the marker may malfunction by induction noise.
PC
(Human-machine interface)
Control unit
External Input and Output
(EXT. I/O)
Multi-axis control card
(optional)
Control unit
Head unit
Positioning system
System Configuration
Ferrite core
(supplied to
the multi-axis control card)
Marker-side
AXIS. I/O connector
Summary of Contents for ML-73 EL Series
Page 1: ...Z11OM1209102 02 Fiber Laser Marker ML 73 EL OPERATION MANUAL Original instructions...
Page 4: ......
Page 133: ...Appendix...