Amada ML-73 EL Series, Operation Manual, Page: 39 / 138

35
ML-73
□□
EL
Starting/Stopping the
Equipment
Turn the marker on and off as follows. Startup and shutdown (and confirmation) is possible from
LMDraw6 using a computer.
■
Starting the Marker
1
Before starting the marker, confirm the following points:
・
The Control Unit and computer are off.
・
A memory card is correctly inserted in the Control Unit.
・
The Control Unit is connected to the computer with a USB cable.
2
Turn on the leakage breaker at the back of the Control Unit.
3
After ensuring that the emergency stop button is released (i.e., the button is out), turn on the Power
switch of the Control Unit.
The self-diagnostic procedure begins.
7.1 Turning the Hardware On and Off
Before inserting or removing the memory card, always turn off the Power switch. If the
Power switch is on when cards are inserted or removed, data may be lost or the
memory card may become unusable.
If a USB cable is connected, always turn on the Control Unit first.
During the self-diagnostic procedure and while data is being saved, the Memory Card
Access indicator remains lit. Do not remove the memory card, or turn off the Power
switch while the Memory Card Access indicator is lit. Otherwise, the data may
become corrupted and the memory card unusable.
Chapter
7