manualshive.com logo in svg

Allen Organ Company L-124 BRAVURA SERIES, User Manual

Share
Download
Allen Organ Company L-124 BRAVURA SERIES User Manual Download Page 73

 

71

 

TRANSMIT/RECEIVE 
   STOPS ON 
 
 

TRANSMIT/RECEIVE 
   STOPS ON 
 
 

10. Transmission/Reception of Individual Stop Data 

This function allows the organist to turn on/off the transmission and reception of 
individual stop data, known in MIDI terminology as "Non-Registered Parameters".  In 
some cases individual stop data (on/off) from the organ may conflict with data from an 
external MIDI device.  When this occurs, select the "OFF" position.

 

Note:  

Piston changes will still be transmitted and received, because they are classified as 

MIDI program changes. 
Advance to the 'TRANSMIT / RECEIVE STOPS' window function: 

To change the on/off status of the Transmit/Receive Stops function, press the 

CURSOR

 

button to position the cursor on the control 
value. 
 
 
 
Turn the 

ROTARY DIAL

 to change the transmit/receive status on or off. 

Summary of Contents for L-124 BRAVURA SERIES




















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands