37
SEQNCR PLAY+ #01
Work 00XXX STOP
SEQNCR PLAY+ #01
FILE NOT FOUND!
CAPTURE MEMORY
SAVE ALL 01
Press the
MEMORY
button to begin
playback. The counter
will start counting to
indicate that playback has
started.
Important!
If the selected MIDI song file
number is not located when playback is
started, the display will indicate “FILE NOT
FOUND!” and playback will not begin. Select
a different MIDI song file number to continue.
Note:
The PAUS and STOP control functions of the Sequencer will operate in the same
manner as described in Section 2d.
3. Capture Memory Registration Save/Load
All GeniSys™ instruments can both save and load capture registration data to the USB
flash device. Capture registrations, piston configuration, MIDI settings, Crescendo/Tutti B
settings and Piston Sequencer data (when applicable) can be saved and loaded using the
GeniSys™ Controller when a USB flash device is inserted into the USB memory port.
To access the Capture Save feature, advance to
the CAPTURE MEMORY window function
(see section A-2)
.
Important!
A USB flash device must be inserted into the USB memory port in order for
the capture save/load feature to be available. Registration files are stored within the “root”
directory of the USB flash device and use the standard MIDI System Exclusive or MIDI
Sysex data file format with the (.syx) extension.
The Capture Memory feature contains
several display functions. Here is a
quick breakdown of those functions and
what they do:
Mode Select:
LOAD, SAVE or DEL.
LOAD: Loads a selected capture file
number.
SAVE: (3) options (
Type Select
):
“ALL” Saves all capture registrations, piston configuration, MIDI settings,
Crescendo/Tutti B settings and Piston Sequencer data (when applicable).
“PCF” Saves only the piston configuration data.
“CRB” Saves only the Crescendo/Tutti B data.
DEL:
Deletes the selected capture file number.
