64
GEN 1 BANK 0
P:XXX
GEN 1 BANK 0
P: 1
GEN 1 BANK 0
P: 1
Program Numbers:
With NUMBERS selected as the display mode, the 'MIDI PROG CHANGE' window
function will display:
With PRESET selected as the program change mode, press a General piston. The
GeniSys™ Controller will display the same MIDI program change number as the
associated piston pressed. For example, pressing General Piston 1 will display:
Important!
The MIDI program change number will be displayed in PRESET mode, no
matter if NUMBERS or GEN MIDI is selected. USER mode must be selected to view
the GENERAL MIDI sound names. USER mode must also be selected to be able to
assign MIDI program change numbers higher than the highest number of General pistons.
With USER selected as the program change mode, along with NUMBERS as the display
mode, “- - -” (OFF) or any program change number from 1 through 127 may be assigned
to any General piston.
There may be a number or “- - -” following the “
P:
”.
This “
P:
” represents the Program
Change Number and does not stand for PRESET in this window. If there is “- - -”
following “
P:
” this means that the “ZERO” Program Change Number will be sent from
the associated piston.
To change the MIDI program change
numbers, press the
CURSOR
button until the
cursor is positioned on
the program change
number value.
Turn the
ROTARY DIAL
to change the program number value.
Section C-4
explains
this procedure in more detail.
