18
On the GeniSys™ Controller, locate the
MEMORY
button. Press and hold the
MEMORY
button. Then, while holding
MEMORY
, press the General Pistons that will
correspond to your three-digit code. Release
the
MEMORY
button and an "L" will appear
next to the “M” number in the display,
indicating this memory is now locked. As
long as the memory remains locked, the
piston registrations on that memory
cannot be changed. Other organists will
still be able to use the locked
registrations; however they cannot be
changed. Remember; choose an easy to
remember three-digit code.
Note:
Each capture memory level lock code can be different!
6. Unlocking Memories Using Your Code
The
Main Window
function must be displayed
(
See Section A-2)
. To unlock a memory,
select the capture memory to be unlocked.
Remember, locked capture memories will
have an “L” behind the number. Once a
desired capture memory is selected,
press and hold the
MEMORY
button in
the GeniSys™ Controller. Then, while
pressing
MEMORY
, enter the same
three-digit code that was used to lock
this memory (
See Section A-5).
Release
the
MEMORY
button. If the correct
code was entered, the "L" will disappear, indicating that this memory is now unlocked.
7. Unlocking All Memories If You Forget Your Code
Advance to the 'UNLOCK ALL CAPTURE MEMORIES' window function
(see
section A-2).
Press and hold the
MEMORY
button on the
GeniSys™ Controller, then press General
Pistons 2-5-5, in sequence. Release the
MEMORY
button. The display will
automatically return to the
Main Window
function. All capture memories are
now unlocked, including those
memories other organists may have
locked, however, registrations
remain unchanged. The display
will return to the
Main Window
function when completed.
M 1L
0
M 1
0
UNLOCK ALL
CAPTURE MEMORIES
