Allen Organ Company L-124 BRAVURA SERIES, User Manual

Page: 53 / 83

51
PISTON SEQUENCER
OFF
PISTON SEQUENCER
SIMPLE STEPPER
SIMPLE STEPPER MODE
To select the SIMPLE STEPPER mode, advance to the 'PISTON SEQUENCER' window
function
(see Section A-2)
.
Press the
CURSOR
button to position the
cursor on the mode value line.
Turn the
ROTARY DIAL
to select SIMPLE
STEPPER mode.
To use the SIMPLE STEPPER, return to the
Main
Window
function. Press and hold the
SET
piston.
Then, while holding
SET
, press the
CANCEL.
USING THE SIMPLE STEPPER
If the SIMPLE STEPPER mode is activated,
the abbreviation “SS” will appear on the
second line of the display. Using the
pistons/toe studs labeled “+” or “
― “, the
SIMPLE STEPPER will step up or down
sequentially through all General Piston
positions within the selected capture memory
level, stopping when either extreme is reached.
To start SIMPLE STEPPER, select a capture
memory level
(see Section A-3)
and then press
General piston #1. The registration associated
with the selected capture memory level and
General piston #1 will register on the stops
and the display will indicate that General #1
has been pressed. This will also set the SIMPLE STEPPER’s starting step position.
Note:
Pressing the “+” or “ ― “ piston will also select General #1 and also set the
SIMPLE STEPPERS starting step position.
Pressing the “+” piston/toe
stud will select the next
General piston number, in
this case General Piston #2.
Remember!
If General #1 is displayed, the “ ― “ piston will do nothing since General #1
is the lowest possible General piston number available.
M 1
SS
0
Simple Stepper
is ACTIVE!
M 1 Gen 1
SS
0
M 1 Gen 2
SS
0