manualshive.com logo in svg

Allen Organ Company L-124 BRAVURA SERIES, User Manual

Share
Download
Allen Organ Company L-124 BRAVURA SERIES User Manual Download Page 26

 

24

 

 Safely Remove 
 USB? Press MEM 

 

 

B.  USB OPERATION 

1.  USB Memory Port 

GeniSys™ consoles are equipped with a USB type memory port.  Depending on the 
model instrument, the USB memory port can be located at 
various locations on the console.  The USB memory port 
can accept USB flash devices up to 32GB in size. 

Important!

  USB flash devices larger than 32GB will not 

operate correctly within GeniSys™ model instruments.  
Data loss may occur if flash devices larger than 32GB are 
used. 
The USB flash device is used for saving or backing up the 
instrument’s capture memories and also for the built-in 
Sequencer.  These functions will not operate unless a USB flash device has been inserted 
into the USB memory port.  However, the USB flash device does not need to be installed 
for normal playing operation of the instrument. 

Insert a USB Flash Device 

Locate the USB memory port on the instrument and carefully insert the USB flash device 
into the port socket.  The USB flash device can only be inserted in one orientation, so do 
not force the USB flash device into the socket if it doesn’t fit correctly.  Doing so may 
damage the port socket and the USB flash device.  If the USB flash device doesn’t fit 
correctly, re-orient the USB flash device and re-insert it into the port socket.  Once the 
USB flash device is seated correctly into the port socket, the GeniSys™ software will 
automatically connect to the USB flash device.  This will take a few seconds. 

Remove a USB Flash Device 

Important!

  Never remove a USB flash device from the USB memory port without first 

operating the SAFELY REMOVE USB function from within the GeniSys™ Controller.  
Removing the USB flash device without operating this function may cause data loss to 
occur on the USB flash device. 
To remove a USB flash device, advance to the “SAFELY REMOVE USB” window 
function 

(see Section A-2)

. 

To remove the USB flash device, press the 
MEMORY button on the GeniSys™ 
Controller.  The display will return to the 

Main Window

 function when it is safe to 

remove the USB 
flash device from 
the USB memory 
port socket. 

Note:

    If  a  USB 

flash device is not 
connected to the instrument’s USB memory 
port, the SAFELY REMOVE USB function 
will not appear within the GeniSys™ 
Controller. 

M  1          
              

 

 

0 

Summary of Contents for L-124 BRAVURA SERIES




















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands