59
EDIT:SEQ01 S01
MEM 1 Gen 8
SHOW:SEQ01 S01
MEM 1 Gen 8
SHOWING/PREVIEWING A PISTON SEQUENCE
To enter the SHOW mode, press the
CURSOR
button to position the cursor on
the editing function.
Turn the
ROTARY DIAL
to select "
SHOW
"
mode.
Using the CURSOR button/ROTARY DIAL, first select a piston sequence number and
then a step position to be viewed. Use the ROTARY DIAL to change the step position
number. As the step position counter changes the selected step position's programmed
data will appear within the display and will also be reflected on the organ's stop controls.
The Show mode is provided as a "shortcut". Instead of exiting out of the editing window
to view a piston sequence, the contents of piston sequences may be viewed from within
the edit window. The Show mode displays step positions and programmed data within
the display. Stop controls operate showing the registration saved for each step position.
The organist can toggle back and forth between the editing modes by using the CURSOR
button and ROTARY DIAL to make changes to the piston sequence.
USING A CUSTOM PISTON SEQUENCE
To use a custom piston sequence, make sure that the Custom Piston Sequence mode is
selected and then return to the
Main Window
function
(see Sections A-2 and C-7)
. The
display will indicate the Custom Piston Sequence mode is selected as well as the piston
sequence number and step position.
From here, the organist
can select a custom
piston sequence to use
and step position. The
capture memory level
and piston display will
reflect the programmed
data within the selected
step position number.
To select a piston sequence number, press the
CURSOR
button to
position the cursor on the
piston sequence number.
M 1 Gen 2
CS 001 ST 01
0
