44
RE-INITIALIZE
Piston Config.
RE-INITIALIZE
Piston Config.
RE-INITIALIZE
MIDI Settings
RE-INITIALIZE
Capture Mem. XX
RE-INITIALIZE
Crescendo B
RE-INITIALIZE
Tutti/Ventil B
To return to the
Main Window
to store registrations to
the pistons you just configured, press and hold the
SET
piston. Then, while holding
SET
, press
CANCEL
.
Release both.
(See Section A-4)
.
The use of the CONFIGURE PISTONS function is only limited by one’s creative
imagination.
Remember
: The above examples only determine which stops will become accessible by
the reconfigured pistons;
they will not change any previously saved registrations.
3. Restoring Original Factory Settings
Advance to the ‘RE-INITIALIZE’ window function
(see Section A-2)
. The window will
display...
Certain functions can be restored to the original factory settings. They are:
The Piston Configuration re-initialization includes all the Configure Piston settings. The
MIDI Settings re-initialization includes all MIDI program change mapping. The Capture
Memory re-initialization will reset the last available capture memory to factory default
registrations
(if applicable)
.
Each of these functions can be restored individually. To select the factory settings you
wish to restore press the
CURSOR
button until the cursor is positioned on the parameter
value located on the 2
nd
line of the display. Then, turn the
ROTARY DIAL
to select the
desired setting to re-initialize.
Press and hold the
MEMORY
button. Then, while
holding
MEMORY
, press General Pistons 2-5-5 in
sequence.
