
33
SEQNCR REC #01
Work 00XXX STOP
SEQNCR REC #01
FILE EXISTS!
SEQNCR REC #01
Work 00XXX PAUS
SEQNCR REC #01
Work 00XXX FWD
Hint!
To ensure the initial console setup information is recorded within a MIDI song,
perform these steps after the recording has started:
1.
Press the
CANCEL
piston. This will turn off any stops which are turned on and
also record the currently selected capture memory level within the MIDI song.
Doing this will set the organ to the correct capture memory level when the MIDI
song is played back preventing the potential for incorrect piston registrations to be
selected and recorded into the MIDI song.
2.
Select a piston registration or manually select stops on the stopboard.
3.
Move the expression shoes and set them to a desired position. Doing this will
record the organ’s volume information within the MIDI song. This way when a
MIDI song is played back, the organ’s volume will be set to the correct level.
To begin the actual recording, press the
MEMORY
button. The counter will start counting
to indicate the Sequencer is
now recording. At this
point, perform the above
instructions (see Hint!
above) and begin recording
the performance into the
Sequencer. All key, pedal, piston, stop or expression movements will be recorded.
Important!
If a selected MIDI Song File
already exists when a recording is started, the
display will indicate “FILE EXISTS!” and
recording will not begin. Delete the current
selected MIDI song file number or select a
different MIDI song file number to continue.
Notice the Transport Control Function changes
to “PAUS” when the recording is started. The
PAUS function allows the organist to be able to
pause or temporarily stop the Sequencer during
a recording.
To “pause” the Sequencer during the recording,
press the
MEMORY
button. The counter will
stop counting indicating the
recording has stopped. The
Transport Control Function
will revert back to “FWD” indicating the
recording may be resumed at the current counter value.
Note:
The counter value cannot be changed.
Important!
Any registration changes made to the organ while the recording has been
paused will not be recorded!