67
MIDI PROG CHG
GEN 1 BANK 0
P: 1
GEN 1 BANK 0
P: 1
Selecting MIDI Bank Numbers:
Bank Numbers are assignable in the same way that MIDI Program Numbers are (
See
Section C-3)
. You MUST have USER mode selected before assigning Bank numbers!
Advance to the 'MIDI PROG CHANGE' window function
(see Section A-2)
.
For this example press the General piston #1. The display will change to:
The window will display the piston pressed, the MIDI BANK Number, and the program
number being sent by that piston.
Press the
CURSOR
button until the cursor is positioned on the MIDI Bank number
value. Turn the
ROTARY DIAL
to change the MIDI BANK number value.
Note:
Refer to the Bank selection/program number chart in the owner’s manual for the
external MIDI device you are using to be sure you are using a valid Bank number value.
Note:
Once you have assigned a MIDI BANK Number to a piston, that number will
remain assigned to that piston even if the organ has been turned off.
Important!
Once MIDI Bank change programming is complete the user must exit the
piston programming window function, by using the
SET
and
CANCEL
pistons
(see
Section A-2)
, for any changes to take effect.
