29
SEQNCR PLAY #01
Work 00000 STOP
SEQNCR PLAY #01
Work 00000 FWD
SEQNCR PLAY #01
Work 00XXX STOP
SEQNCR PLAY #01
Work 00XXX FWD
SEQNCR PLAY #01
Work 00XXX PAUS
SEQNCR PLAY #01
FILE NOT FOUND!
d. Play a MIDI Song File
To load and play a MIDI song file, select a MIDI Song Source Folder and MIDI Song File
Number
(see sections 2a and 2b above)
.
Press the
CURSOR
button to position the cursor on
the Transport Control Function.
Turn the
ROTARY DIAL
to select the “FWD”
control function.
Press the
MEMORY
button to begin playback. The
counter will start counting to
indicate that playback has
started.
Important!
If a selected MIDI Song File is not
located when playback is started, the display will
indicate “FILE NOT FOUND!” and playback will
not begin.
When playback begins, notice the Transport Control
Function changes to “PAUS” when playback has
started. The PAUS function allows the organist to
pause or temporarily stop the Sequencer during
playback.
To “pause” the Sequencer during playback, press the
MEMORY
button. The counter
will stop counting and the
instrument will stop playing
indicating playback has stopped.
The Transport Control Function
will revert back to “FWD” indicating playback may
be resumed at the current counter value.
Note:
The counter value cannot be changed from its current value.
