34
SEQNCR REC #01
Work 00XXX PAUS
SEQNCR REC #01
Work 00XXX STOP
SEQNCR PLAY #01
Work 00000 STOP
SEQNCR REC #01
Work 00000 STOP
SEQNCR REC #01
Work 00140 STOP
To resume the recording at the current counter
value, press the
MEMORY
button. The
counter will begin counting
from the current counter
value indicating the
recording has resumed.
The Transport Control
Function will change to “PAUS” in case the organist needs to pause the recording again.
Upon completion of the recording, press the
CANCEL
piston to turn off all of the stops
and also move the expression shoes to their lowest position.
Then, turn the
ROTARY DIAL
until the
Transport Control Function
reads “STOP”.
Finally, press the
MEMORY
button. This will
stop the recording and
automatically set the
Sequencer into playback
mode.
g. Record/Append A MIDI Song File From A Different Starting Point (SRCH):
To append a recording from a different starting point within a MIDI song file, first select a
MIDI Song Source Folder and MIDI Song File Number
(see sections 2a and 2b above)
.
Place the Sequencer into record mode
(see section 2f above)
.
Press the
CURSOR
button to position the
cursor on the counter value.
Turn the
ROTARY DIAL
to select a different counter value. Turning the Rotary Dial
clockwise will increase the
counter number while turning
the Rotary Dial counter-
clockwise will decrease the
counter number.
