27
SEQNCR PLAY #01
Work 00000 STOP
SEQNCR PLAY #01
Work 00000 STOP
SEQNCR PLAY #01
List3 00000 STOP
a. Select a MIDI Song File Number:
To select a MIDI song file number, press the
CURSOR
button on the GeniSys™
Controller to position the cursor on the MIDI
Song File Number. Turn the
ROTARY DIAL
to select a
song number. Turning the
Rotary Dial clockwise will
increase the file number while
turning the Rotary Dial counter-clockwise will
decrease the file number. Any file number between 01 and 99 may be selected.
b. Select a MIDI Song File Source Folder:
The GeniSys™ Sequencer uses several pre-defined “source folders” or directories in which
MIDI song files are stored. Different source folders may be useful for MIDI song file
storage and also in case the organist would like to create playlists for sequential playback
of MIDI Song Files. The organist may change the MIDI song file source folder at any
time.
To change the MIDI Song File Source Folder,
press the
CURSOR
button on
the GeniSys™ Controller to
position the cursor on the
MIDI Song File Source
Folder.
Turn the
ROTARY DIAL
to
change and select a different
MIDI Song File Source Folder.
The pre-defined source folders
available are: Work, List1,
List2, List3, List4, List5, List6,
List7, List8 and List9.
Important!
The Sequencer will not locate or use any other source folders or directories
which may exist on the USB flash device other than the listed source folders (above).
However, other directories may be utilized for MIDI Song File storage on the USB flash
device when using a PC and the included librarian software.
