50
PISTON SEQUENCER
OFF
PISTON SEQUENCER
OFF
8. Piston
Sequencer
The Piston Sequencer allows the organist to step through a sequence of registrations
using piston/toe studs labeled "+" and "-". Four modes of operation are available.
OFF:
The Piston Sequencer is disabled. The "+" and "-" pistons/toe studs will not
function.
SIMPLE STEPPER:
This mode allows the organist to step sequentially through the
available General pistons of a single capture memory level.
ADVANCED STEPPER:
This mode allows the organist to step sequentially through
the available General pistons of all capture memory levels.
CUSTOM SEQS:
This mode allows the organist to step sequentially through a user
programmed piston sequence of any available piston and capture memory level. Piston
Sequence memory allows 512 steps allocated to a maximum of 99 sequences.
Note
: Custom piston sequence data will be saved to the USB flash device when selecting
the ALL capture data type option when saving capture memory registration data
(see
section B-3 in this manual for more information)
.
OFF MODE
To select the OFF mode, advance to the ‘PISTON SEQUENCER’ window function
(see
Section A-2)
.
Note:
The organ will remember the Piston Sequencer mode setting when power is turned
off. If Piston Sequencer was previously enabled previously, the OFF mode may be
selected to disable the Piston Sequencer.
Press the
CURSOR
button to position the
cursor on the mode value line.
Turn the
ROTARY DIAL
to select OFF mode.
