16
2. Advancing Through the Windows
The Allen Organ GeniSys™ operating software contains many settings that are user-
programmable. Each programmable setting can be adjusted via the GeniSys™
Controller. These programmable settings are divided up into many window functions.
To advance the GeniSys™ Controller's
display to the next window function, locate
and press the
CURSOR
button until the
CURSOR
is positioned under the
abbreviation
“M”
within the display, this
location is known as the “Menu Function”.
Once the cursor is positioned, slowly turn the
ROTARY DIAL
clockwise, the display will advance to the next window function.
When the second window function is displayed, rotate the
ROTARY DIAL
counter-
clockwise, the window will return to the Main window display function. Turn the
ROTARY DIAL
counter-clockwise again and the last window function will display. The
window functions “wrap around” for ease of accessing functions quickly.
Remember:
You may return to the
Main Window
function at any time by pressing and holding the
SET
piston. Then, while holding
SET
, press the
CANCEL
piston, release both pistons. This procedure will
always return the Console Controller’s display to the
Main Window function.
For reference, the last window function is:
3. Selecting the Capture Memories
Locate the
CURSOR
button on the GeniSys™ Controller. Press this button to move the
cursor to the number to the right of the
abbreviation
“M”
on the display. Once the
cursor is positioned on the memory number,
turn the
ROTARY DIAL
clockwise
to select
the memories sequentially from
M 1, to M 2,
to M 3.
Or, turn the
ROTARY DIAL
counter-clockwise to select the memories sequentially from
M 1, to M 40, to M 39, M
38...
The capture memories allow you to save different registrations on each piston/toe piston.
This means
General Piston 1
on
M 1
may be totally different from
General Piston 1
on
M 2, M 3, etc.
UNLOCK ALL
CAPTURE MEMORIES
M 1
0
M 1
0
