manualshive.com logo in svg

Alcatel 060170-10, User Manual, Page: 415 / 430

Share
Download
Alcatel 060170-10 User Manual Download Page 415

 VoIP Commands

Page 5-273

Command Usage

Display cumulative ISDN level 2 statistics. (

Not available this release.

)

Syntax Options

view voice channel isdn level 2 stats

view voice channel    <

slot/port/startChannel-endChannel 

> isdn level 2 stat[istic]s

Definitions:

slot

Specifies chassis slot number where VSM is installed, (e.g., 

2

).

port

Specifies physical port number on voice daughtercard, (e.g., 

1

).

channel

Specifies port channel number in which to view ISDN level 2 statistics, (e.g., 

25

).

istic

Optional command syntax. Type either 

stats

 or 

statistics

 in the command line.

♦

 Syntax Notes 

♦

This command only works from within the command line inter-
face, and cannot be used from within the 

vsmboot.asc

 file.

Default:
None

Command Example:

view voice channel 2/1 25 isdn level 2 statistics
view voice channel 2/1 25 isdn level 2 stats
view voice channel 2/2 30 isdn level 2 statistics
view voice channel 2/2 30 isdn level 2 stats

Summary of Contents for 060170-10















































































































































































































































































































































































































































Reviews:

No comments