Alcatel 060170-10, User Manual, Page: 310 / 430

VoIP Commands
Page 5-168
Command Usage
Override call signaling for network overlap dialing (on/off). This command should only be
used under the supervision of trained personnel.
Syntax Options
Remarks
The call moves to call progress when dialing is completed, and net-connect occurs whether
or not all digits have been collected.
voice signaling override network overlap dialing
voice signaling channel <
slot/port/startChannel-endChannel
> [no] override network overlap dialing
{on | off}
Definitions:
slot
Specifies chassis slot number where VSM is installed, (e.g.,
2
).
port Specifies physical port number on voice daughtercard, (e.g.,
1
).
startChannel
The first number in the range of voice channels (e.g.,
1
).
endChannel The last number in the range of voice channels (e.g.,
30
).
♦
Syntax Note
♦
Be sure to separate the start and end range numbers with a
hyphen (e.g.,
1-30
).
no
Optional command syntax.
♦
Syntax Note
♦
If
no
is used then ON and OFF cannot be specified.
on
Turns ON network overlap dialing for specified telephony signaling channel.
off
Turns OFF network overlap dialing for specified telephony signaling channel.
Default:
The default setting is
no override network overlap dialing
.
Command Examples:
voice signaling channel 2/1/1-12 no override network overlap dialing
voice signaling channel 2/2/13-24 override network overlap dialing on
voice signaling channel 2/3/1-30 override network overlap dialing off