Alcatel 060170-10, User Manual, Page: 281 / 430

VoIP Commands
Page 5-139
Command Usage
Specify Foreign Exchange Office Ground Start (FXS GS) debounce interval for tip ground
detector.
Syntax Options
Remarks
The
voice signaling protocol
command must be set to the corresponding protocol type before
any commands for E&M (Wink Start, Immediate Start, and Delay Start Signaling), and FXS/
FXO (Loop and Ground Start) commands will take effect.
voice signaling fxo gs tip ground debounce
voice signaling channel <
slot/port/startChannel-endChannel
> fxo gs tip ground debounce <
value
>
Definitions:
slot Specifies chassis slot number where VSM is installed, (e.g.,
2
).
port
Specifies physical port number on voice daughtercard, (e.g.,
1
).
startChannel The first number in the range of voice channels (e.g.,
1
).
endChannel
The last number in the range of voice channels (e.g.,
30
).
♦
Syntax Note
♦
Be sure to separate the start and end range numbers with a
hyphen (e.g.,
1-30
).
value
Specifies the debounce (delay interval) for debouncing the tip ground detector, in millisec-
onds from 1 to 1,000, (e.g.,
20
).
♦
Syntax Note
♦
Do not use commas when entering the fxs gs debounce interval
value for loop open detection (for example,
1,000
will return a
syntax error message).
Default:
The default value is
20
milliseconds.
Command Examples:
voice signaling channel 2/1/1-12 fxo gs tip ground debounce 20
voice signaling channel 2/2/13-24 fxo gs tip ground debounce 500
voice signaling channel 2/3/1-30 fxo gs tip ground debounce 1000