Alcatel 060170-10, User Manual, Page: 272 / 430

VoIP Commands
Page 5-130
Command Usage
Specify Foreign Exchange Station Ground Start (FXS GS) time to wait after ring before
grounding tip.
Syntax Options
Remarks
The
voice signaling protocol
command must be set to the corresponding protocol type before
any commands for E&M (Wink Start, Immediate Start, and Delay Start Signaling), and FXS/
FXO (Loop and Ground Start) commands will take effect.
voice signaling fxs gs min ring ground
voice signaling channel <
slot/port/startChannel-endChannel
> fxs gs min[imum] ring ground
<
value
>
Definitions:
slot
Specifies chassis slot number where VSM is installed, (e.g.,
2
).
port Specifies physical port number on voice daughtercard, (e.g.,
1
).
startChannel
The first number in the range of voice channels (e.g.,
1
).
endChannel The last number in the range of voice channels (e.g.,
30
).
♦
Syntax Note
♦
Be sure to separate the start and end range numbers with a
hyphen (e.g.,
1-30
).
imum
Optional command syntax. Type either
min
or
minimum
in the command line.
value
Specifies the minimum time to wait after ring ground detection before line responds by
grounding tip, in milliseconds from 0 to 65535, (e.g.,
100
).
♦
Syntax Note
♦
Do not use commas when entering the minimum fxs gs time to
wait value after ring ground before grounding tip (for example,
10,000
will return a syntax error message).
Default:
The default value is
100
milliseconds.
Command Examples:
voice signaling channel 2/1/1-12 fxs gs minimum ring ground 100
voice signaling channel 2/2/13-24 fxs gs min ring ground 30000
voice signaling channel 2/2/1-30 fxs gs min ring ground 65535