Alcatel 060170-10, User Manual, Page: 253 / 430

VoIP Commands
Page 5-111
Command Usage
Specify Foreign Exchange Station Loop Start (FXS LS) minimum time to wait before declaring
on-hook by
originator (calling party).
Syntax Options
Remarks
The
voice signaling protocol
command must be set to the corresponding protocol type before
any commands for E&M (Wink Start, Immediate Start, and Delay Start Signaling), and FXS/
FXO (Loop and Ground Start) commands will take effect.
voice signaling fxs ls originate clear detect
voice signaling channel <
slot/port/startChannel-endChannel
> fxs ls originate clear detect <
value
>
Definitions:
slot Specifies chassis slot number where VSM is installed, (e.g.,
2
).
port
Specifies physical port number on voice daughtercard, (e.g.,
1
).
startChannel The first number in the range of voice channels (e.g.,
1
).
endChannel
The last number in the range of voice channels (e.g.,
30
).
♦
Syntax Note
♦
Be sure to separate the start and end range numbers with a
hyphen (e.g.,
1-30
).
value
Specifies the minimum time to wait if call originator hangs up before on-hook condition
declared, in milliseconds from 1 to 60,000, (e.g.,
300
).
♦
Syntax Note
♦
Do not use commas when entering the fxs ls call originate clear
detect value (for example,
1,000
will return a syntax error
message).
Default:
The default value is
300
milliseconds.
Command Examples:
voice signaling channel 2/1/1-12 fxs ls originate clear detect 300
voice signaling channel 2/1/13-24 fxs ls originate clear detect 30000
voice signaling channel 2/1/1-30 fxs ls originate clear detect 60000