Alcatel 060170-10, User Manual, Page: 335 / 430

VoIP Commands
Page 5-193
Command Usage
Set coding profile fax/modem switchover (enable/disable).
Syntax Options
Remarks
DSP tone detection on the voice channel must be ON in the specified coding profile if fax
modem switchover is desired, as switchover relies on tone detection. Switchover can be either
ON or OFF for a fax-only coding profile.
voice coding profile switchover
voice coding profile <
“codingProfName”
> switchover {on | off}
Definitions:
codingProfName
Identifies coding profile by name, (e.g.,
salemprof1
); maximum length of 40 characters.
The following characters are permitted in the coding profile name: a-z, A-Z, 0-9, space and
# * ~ ’ ‘ ; : , .@ $ % ^ _ & | / \ < > ( ) [ ] { }
on
Turns ON fax/modem switchover for specified coding profile.
off
Turns OFF fax/modem switchover for specified coding profile.
♦
Syntax Notes
♦
If the coding type is set to either PCM Mu-Law or PCM A-Law
via the
voice coding profile codec type
command, this parame-
ter can be ON or OFF.
If the coding type is set to fax T.38 this command should be set
to OFF, because no switchover is required.
Default:
The default setting is
off
.
Command Example:
voice coding profile “cp1” switchover on
voice coding profile “cp2” switchover on
voice coding profile “cp3” switchover off
voice coding profile “cp4” switchover on
voice coding profile “cp5” switchover on