Alcatel 060170-10, User Manual, Page: 234 / 430

VoIP Commands
Page 5-92
Command Usage
Specify minimum Ear & Mouth wink delay on incoming calls.
Syntax Options
Remarks
The
voice signaling protocol
command must be set to the corresponding protocol type before
any commands for E&M (Wink Start, Immediate Start, and Delay Start Signaling), and FXS/
FXO (Loop and Ground Start) commands will take effect.
voice signaling emw in wink wait min
voice signaling channel <
slot/port/startChannel-endChannel
> emw in wink wait min[imum]
<
value
>
Definitions:
slot Specifies chassis slot number where VSM is installed, (e.g.,
2
).
port
Specifies physical port number on voice daughtercard, (e.g.,
1
).
startChannel The first number in the range of voice channels (e.g.,
1
).
endChannel
The last number in the range of voice channels (e.g.,
30
).
♦
Syntax Note
♦
Be sure to separate the start and end range numbers with a
hyphen (e.g.,
1-30
).
imum
Optional command syntax. Type either
min
or
minimum
in the command line.
value Specifies the minimum delay in milliseconds, from 5 to 60,000, (e.g.,
150
), before begin-
ning the wink on the
E-lead
after detecting a line seizure on the
M-lead
for incoming calls.
♦
Syntax Note
♦
Do not
use commas when entering the minimum E&M wink
delay value on incoming calls (for example,
24,000
will return a
syntax error message).
Default:
The default value is
2000
.
Command Examples:
voice signaling channel 2/1/1-12 emw in wink wait minimum 150
voice signaling channel 2/2/13-24 emw in wink wait min 30000
voice signaling channel 2/3/1-30 emw in wink wait min 60000