Alcatel 060170-10, User Manual, Page: 283 / 430

VoIP Commands
Page 5-141
Command Usage
Specify Foreign Exchange Office Ground Start (FXS GS) time between consecutive ring cycles .
Syntax Options
Remarks
The
voice signaling protocol
command must be set to the corresponding protocol type before
any commands for E&M (Wink Start, Immediate Start, and Delay Start Signaling), and FXS/
FXO (Loop and Ground Start) commands will take effect.
voice signaling fxo gs ringing inter cycle
voice signaling channel <
slot/port/startChannel-endChannel
> fxo gs ringing inter cycle <
value
>
Definitions:
slot
Specifies chassis slot number where VSM is installed, (e.g.,
2
).
port Specifies physical port number on voice daughtercard, (e.g.,
1
).
startChannel
The first number in the range of voice channels (e.g.,
1
).
endChannel The last number in the range of voice channels (e.g.,
30
).
♦
Syntax Note
♦
Be sure to separate the start and end range numbers with a
hyphen (e.g.,
1-30
).
value Specifies the time between fxs gs start time between consecutive ring cycles, in millisec-
onds from 1 to 1,000, (e.g.,
5000
), to detect ringing.
♦
Syntax Note
♦
Do not
use commas when entering the fxs gs start time between
consecutive ring cycles to detect ringing (for example,
5,000
will
return a syntax error message).
Default:
The default value is
5000
milliseconds.
Command Examples:
voice signaling channel 2/1/1-12 fxo gs ringing inter cycle 5000
voice signaling channel 2/2/13-24 fxo gs ringing inter cycle 30000
voice signaling channel 2/3/1-30 fxo gs ringing inter cycle 60000