Alcatel 060170-10, User Manual, Page: 203 / 430

VoIP Commands
Page 5-61
Command Usage
Set voice channel initialization (in-service/out-of-service). Signifies the initial state (admin-
status) of the channel, or attempt to modify the state of the channel.
Syntax Options
Remarks
If the configuration of this channel is incomplete, the command is ignored, the channel is
NOT placed into service, and error conditions result.
voice channel state
voice channel <
slot/port/startChannel-endChannel
> state {in service | out of service}
Definitions:
slot Specifies slot number of voice daughtercard installed in switching module, (e.g.,
2
).
port
Specifies physical port number on voice daughtercard, (e.g.,
1
).
startChannel The first number in the range of voice channels (e.g.,
1
).
endChannel
The last number in the range of voice channels (e.g.,
30
).
♦
Syntax Note
♦
Be sure to separate the start and end range numbers with a
hyphen (e.g.,
1-30
).
in service
Puts channel in service as soon as possible after configuration.
out of service
Keeps channel out of service and unused. Channel does not accept hunting or in/out
seizes.
Default:
The default setting is
in service
.
Command Examples:
voice channel 2/1/1-12 state in service
voice channel 2/2/13-24 state out of service