Alcatel 060170-10, User Manual, Page: 268 / 430

VoIP Commands
Page 5-126
Command Usage
Specify Foreign Exchange Station Ground Start (FXO GS) time to wait before declaring off-
hook.
Syntax Options
Remarks
The
voice signaling protocol
command must be set to the corresponding protocol type before
any commands for E&M (Wink Start, Immediate Start, and Delay Start Signaling), and FXS/
FXO (Loop and Ground Start) commands will take effect.
voice signaling fxs gs seize detect
voice signaling channel <
slot/port/startChannel-endChannel
> fxs gs seize detect <
value
>
Definitions:
slot Specifies chassis slot number where VSM is installed, (e.g.,
2
).
port
Specifies physical port number on voice daughtercard, (e.g.,
1
).
startChannel The first number in the range of voice channels (e.g.,
1
).
endChannel
The last number in the range of voice channels (e.g.,
30
).
♦
Syntax Note
♦
Be sure to separate the start and end range numbers with a
hyphen (e.g.,
1-30
).
value
Specifies the time to wait before declaring off-hook (seize detect) condition, in millisec-
onds from 0 to 5,000, (e.g.,
150
).
♦
Syntax Note
♦
Do not use commas when entering the fxs gs time to wait before
declaring seize detect value (for example,
2,500
will return a
syntax error message).
Default:
The default value is
150
milliseconds.
Command Examples:
voice signaling channel 2/1/1-12 fxs gs seize detect 150
voice signaling channel 2/2/13-24 fxs gs seize detect 2500
voice signaling channel 2/3/1-30 fxs gs seize detect 5000