Alcatel 060170-10, User Manual, Page: 184 / 430

VoIP Commands
Page 5-42
Command Usage
Specify T1 voice port attenuation.
Syntax Options
Remarks
To use this command, the voice daughtercard connection type must be set to T1 via the
voice
port interface type
command.
To use this command, the line build out must be set to long haul via the
voice port line build
out
command.
voice port attenuation
voice port <
slot/port
> [line build out] attenuation {0 | -7.5 | -15.0 | -22.5}
Definitions:
slot
Specifies slot number of voice switching daughtercard installed in switching module,
(e.g.,
2
).
port
Specifies physical port number on voice daughtercard, (e.g.,
1
).
line build out
Optional command syntax.
0
Specifies 0 decibels. The decibels value indicates attenuation (i.e., the allowed decrease in
power signal).
-7.5
Specifies -7.5 decibels. The decibels value indicates attenuation (i.e., the allowed decrease
in power signal).
-15.5
Specifies -15.5 decibels. The decibels value indicates attenuation (i.e., the allowed decrease
in power signal).
-22.5
Specifies -22.5 decibels. The decibels value indicates attenuation (i.e., the allowed decrease
in power signal).
Default:
The default attenuation setting is
0
decibels.
Command Examples:
voice port 2/1 line build out attenuation 0
voice port 2/2 line build out attenuation -7.5
voice port 2/3 line build out attenuation -15.0
voice port 2/4 line build out attenuation - 22.5
voice port 3/1 attenuation 0
voice port 3/2 attenuation -7.5
voice port 3/3 attenuation -15.0
voice port 3/4 attenuation -22.5