Alcatel 060170-10, User Manual, Page: 196 / 430

VoIP Commands
Page 5-54
Command Usage
Specify ISDN EURO BRI line type (point to point/point to multipoint). (Point to point not
available this release .)
Syntax Options
Remarks
The
voice port isdn connection switch type
command is used to configure the type of switch
connection for the ISDN ports at the voice daughtercard level. Specification of the E1 ISDN
protocol is optional unless E1 ISDN PRI or BRI Euro is used.
voice port bri line type
voice port <
slot/port
> isdn bri line type {point to point | point to multipoint}
Definitions:
slot Specifies slot number of voice switching daughtercard installed in switching module,
(e.g.,
2
).
port Specifies physical port number on voice daughtercard, (e.g.,
1
).
point to point
Sets physical connection wherein a single network termination point supports a single ter-
minal equipment (TE) device. (
Not available this release. )
point to multipoint
Sets physical connection wherein a single network termination point supports multipoint
terminal equipment (TE) devices.
♦
Syntax Notes
♦
To use this command, the port connection type must be set to
bri euro
via the
voice port interface type
command.
If the voice daughtercard connection port type is set to
bri euro
,
this command will automatically be generated with the default
value of
point to point.
To use this command, the isdn connection protocol must be set
to
net
via the
voice port isdn protocol
command.
Default:
The default setting is
point to multipoint
Command Examples:
voice port 2/1 bri line type point to multipoint
voice port 2/2 bri line type point to multipoint