Alcatel 060170-10, User Manual, Page: 230 / 430

VoIP Commands
Page 5-88
Command Usage
Specify Ear & Mouth signaling time to wait between termination and receiving .
Syntax Options
Remarks
In order to use this command, the
voice signaling protocol
command must be set to the corre-
sponding protocol type of E&M Wink Start, Immediate Start, or Delay Start Signaling.
voice signaling em guard out
voice signaling channel <
slot/port/startChannel-endChannel
> em guard out <
value
>
Definitions:
slot
Specifies chassis slot number where VSM is installed, (e.g.,
2
).
port Specifies physical port number on voice daughtercard, (e.g.,
1
).
startChannel
The first number in the range of voice channels (e.g.,
1
).
endChannel The last number in the range of voice channels (e.g.,
30
).
♦
Syntax Note
♦
Be sure to separate the start and end range numbers with a
hyphen (e.g.,
1-30
).
value Specifies the time period (delay interval) in milliseconds, (e.g.,
400
) from 0 to 60,000,
when only incoming calls are accepted or initiated. Outgoing calls are aborted.
♦
Syntax Note
♦
Do not
use commas when entering the E&M extended time span
(in which only incoming calls are accepted or initiated) for call
termination and receiving value (for example,
10,000
will return
a syntax error message).
Default:
The default value is
400
.
Command Examples:
voice signaling channel 2/1/1-12 em guard out 400
voice signaling channel 2/2/13-24 em guard out 20000
voice signaling channel 2/3/1-30 em guard out 60000