Alcatel 060170-10, User Manual, Page: 223 / 430

VoIP Commands
Page 5-81
Command Usage
Specify E&M signaling time for transition (debounce) to on-hook.
Syntax Options
Remarks
In order to use this command, the
voice signaling protocol
command must be set to the corre-
sponding protocol type of E&M Wink Start, Immediate Start, or Delay Start Signaling.
voice signaling em on hook debounce
voice signaling channel <
slot/port/startChannel-endChannel
> em on hook debounce <
value
>
Definitions:
slot
Specifies chassis slot number where VSM is installed, (e.g.,
2
).
port Specifies physical port number on voice daughtercard, (e.g.,
1
).
startChannel
The first number in the range of voice channels (e.g.,
1
).
endChannel The last number in the range of voice channels (e.g.,
30
).
♦
Syntax Note
♦
Be sure to separate the start and end range numbers with a
hyphen (e.g.,
1-30
).
value Specifies the E&M debounce (delay interval) transition to on-hook state in milliseconds
from 5 to 1,000, (e.g.,
50
).
♦
Syntax Note
♦
Do not
use commas when entering the E&M transition to on-
hook state or debounce transition value (for example,
1,000
will
return a syntax error message).
Default:
The default value is
50
.
Command Examples:
voice signaling channel 2/1/1-12 em on hook debounce 50
voice signaling channel 2/2/13-24 em on hook debounce 5
voice signaling channel 2/3/1-30 em on hook debounce 1000