Alcatel 060170-10, User Manual, Page: 150 / 430

VoIP Commands
Page 5-8
Signaling Attributes (Foreign Exchange Station (FXS) Ground Start Signaling)
Specify FXS ground start time to wait before declaring off-hook 5-126
Specify FXS ground start debounce interval for on-hook transition 5-127
Specify minimum FXS ground start time to wait before declaring on-hook by originator 5-128
Specify minimum FXS ground start time to wait before declaring on-hook by answerer 5-129
Specify FXS ground start time to wait after ring ground before grounding tip 5-130
Specify maximum FXS ground start time to wait for loop to close after ground tip 5-131
Specify minimum FXS ground start time between open loop and idle state 5-132
Set FXS ground start to generate outbound caller ID (on/off) 5-133
Specify FXS ground start debounce interval for off-hook 5-134
Specify FXS ground start debounce interval for ring ground detector 5-135
Signaling Attributes (Foreign Exchange Office (FXO) Ground Start Signaling)
Specify FXO ground start debounce interval for loop open detection 5-137
Specify maximum FXO ground start time between ring ground and tip ground 5-138
Specify FXO ground start debounce interval for tip ground detector 5-139
Specify FXO ground start debounce for incoming ring signal 5-140
Specify FXO ground start time between consecutive ring cycles 5-141
Specify FXO ground start time between consecutive ring pulses 5-142
Set FXO ground start to detect inbound caller ID (on/off) 5-143
Specify FXO ground start number of rings allowed before answering 5-144
Specify FXO ground start debounce interval for loop current detector 5-145
Specify FXO ground start debounce interval for battery reversal detector 5-146
Signaling Attributes (Outbound Caller ID)
Set outbound caller ID name (private/unavailable) to transmit 5-147
Set outbound caller ID number (published/non-published) to transmit 5-148
Signaling Attributes (Tones)
Set outbound tone table (ringing/silence) 5-149
Set call progress tone detection (off/on/relative) 5-150
Set call progress tone detection configuration (default/alternate) 5-151
Specify V.18 tone detection threshold hang time 5-152
Specify V.18 tone detection threshold level 5-153
Specify V.18 tone detection threshold fraction 5-154
Specify V.18 single tone detection threshold level 5-155
Specify V.18 single tone detection threshold time 5-156