Alcatel 060170-10, User Manual, Page: 236 / 430

VoIP Commands
Page 5-94
Command Usage
Specify duration of Ear & Mouth wink delay on incoming calls.
Syntax Options
Remarks
The
voice signaling protocol
command must be set to the corresponding protocol type before
any commands for E&M (Wink Start, Immediate Start, and Delay Start Signaling), and FXS/
FXO (Loop and Ground Start) commands will take effect.
voice signaling emw in wink duration
voice signaling channel <
slot/port/startChannel-endChannel
> emw in wink duration <
value
>
Definitions:
slot
Specifies chassis slot number where VSM is installed, (e.g.,
2
).
port Specifies physical port number on voice daughtercard, (e.g.,
1
).
startChannel
The first number in the range of voice channels (e.g.,
1
).
endChannel The last number in the range of voice channels (e.g.,
30
).
♦
Syntax Note
♦
Be sure to separate the start and end range numbers with a
hyphen (e.g.,
1-30
).
value Specifies the duration of the wink signal on the E-lead for incoming calls in milliseconds
from 5 to 60,000, (e.g.,
200
).
♦
Syntax Note
♦
Do not
use commas when entering the E&M wink duration
value for incoming calls (for example,
200
will return a syntax
error message).
Default:
The default value is
200
.
Command Examples:
voice signaling channel 2/1 1-12 emw in wink duration 200
voice signaling channel 2/2 13-24 emw in wink duration 30000
voice signaling channel 2/3 1-30 emw in wink duration 60000