T E T R A I n d i v i d u a l C o m m u n i c a t i o n
The
Dialing
view shows the called party’s
identification.
•
With the Audio
button, you can switch
the audio routing from the earpiece to the
loudspeaker, and vice versa.
•
If you want to mute the call, touch the Mute
button.
If the call is encrypted, it is indicated in this
view.If the called party’s device does not
support E2EE, you are asked if you want
toinitiate a non-E2EE call because the
recipient does not support E2EE. You can
either
Cancel
an unencrypted call.
If the called party rejects the call, you are
informed that the number is busy.
3.To end the call, touch the End call
button.
Receiving an individual call
A ringing tone and vibration alert you when you receive an individual call. If
the caller is one of your contacts, the contact’s name and number are
displayed; otherwise, only the number is displayed. If the caller has calling
line identification restriction (CLIR) activated, the text
Unknown
is displayed.
Direct calls are connected without any actions from your part, but the caller
information is displayed also in such cases.
When you receive a
duplex
call, your device plays the duplex call ringing tone
and vibrates. The call is opened in the full screen view and the notification
is displayed. If the screen is off, it is switched on and it
remains on during the duration of the call. After the call has ended, the screen
fades out after a short delay.
In the case of the
semi-duplex
call, your device plays the semi-duplex call
ringing tone and vibrates. If the screen is off when you receive the call, the
screen is switched on. The text
Dabat_en_print.book Page 76 Mardi, 27. novembre 2018 5:08 17
