T E T R A G r o u p C o m m u n i c a t i o n
Changing the scanning state
Note:
When scanning is on in the network mode (TMO), the selected
group, the background groups and all groups that are included in
scanning in selected folder are scanned in TMO. When scanning is off
in TMO, only the selected group and the background groups are
scanned.
1. Open the
TETRA Talk Groups
app.
Note:
You can also change the scanning state by using the
, in the Settings or Quick Settings.
2. Tap the folder which contains the group(s) whose scanning state you want
to change.
3. Change the scanning state of the group(s) by using the scanning state
switch.
Dynamic updates in groups
The groups can be updated via TETRA air interface by using Dynamic Group
Number Assignment (DGNA). When DGNA groups are added or removed, an
information tone is played and the Dynamic groups added
or Dynamic
groups removed
icon is displayed in the Android Status Bar. The
corresponding notification in the Android Notification Drawer indicates
whether group(s) were added or removed or if the selected group was
changed. By selecting the
View
action in the notification, you can open the
group list of the selected folder. The DGNA groups are shown at the end of
the group list in all group folders.
The selected group can also be changed by using DGNA. A new or existing
DGNA group can be assigned as the selected group or a selected DGNA
group can be removed from the device by using DGNA.Then the selected
group changes in the device.
When you hear the information tone or the Dynamic groups added
or
Dynamic groups removed
icon is displayed in the Android Status Bar,
check which group is the selected group for example from the PMR Status
Bar.
Dabat_en_print.book Page 69 Mardi, 27. novembre 2018 5:08 17
