Air-Vac DRS27, User Manual

Page: 110 / 384

DRS27 User’s Guide Chapter 4: Software Overview
0025.00.902 4-24
Object:
X: Defines component width (mm). Dimension is applied to camera view
(corner and edge) during component alignment in vision.
Y: Defines component depth (mm). Dimension is applied to camera view
Note: Reducing the x and y object dimension will shift the corners of object dur-
ing alignment viewing which may provide viewing of a larger corner area.
Z-Height: Defines component height (mm).
Nozzle:
Z-Offset: Defines nozzle height in relation to 66 mm standard nozzle. For exam-
ple, the standard EZ nozzle measures 62.5 mm. The offset is –2.50 mm. The
standard site cleaning nozzle is 70.0 mm. The offset is +4.00 mm.
Board:
Z-Height: Defines the board height. If the board does not rest on the carrier, i.e.,
assembly has a frame and board is raised, then, the height of the board in rela-
tion to the board carrier edge supports is the z-height dimension.
Critical: Object and board z-height and nozzle z-offset are used in cal-
culation of z-axis movements. It is critical not to input undersized pa-
rameters.