Air-Vac DRS27, User Manual

Page: 211 / 384

DRS27 User’s Guide Chapter 5: Process Development Guide/Engineering Training
0027.00.902 5-35
•
Under Tutor Results (A) (radio button filled), select (double click) the thermal profile that you cre-
ated (A) , saved and analyzed.
•
The thermal profile will be shown in the “Tutor Results” box (B) .
•
Click on the site cleaning radio button (C) . Select the appropriate site clean profile. It will be dis-
played in the site clean box (D) .
•
Click on the Tutor Masters radio button (E) and select the appropriate Master Templates which
will be displayed in the four boxes (F).
•
Select/create the profile groups (G) where you want the profile to be saved to.
•
Name the new profile (H) .
NOTE: A good way to create the profile name is to copy the tutor results name and paste it in
the Profile Name box.
•
Check the “Use” box (I).
•
The Object/Nozzle/Board dimensions (J) should automatically update from the saved Tutor re-
sult. If they are not correct, update them.
Note: Incorrect Object/Nozzle/Board values may cause the nozzle to hit the component at
high speed causing damage.
A
G
G
G
C
B
D
H
I
J
J
J
F
F
F
F
E