Air-Vac DRS27, User Manual

Page: 137 / 384

DRS27 User’s Guide Chapter 4: Software Overview
0025.00.902 4-51
Run Process:
The Run screen allows the operator to cycle a process profile. A profile must first be opened using the
Open option or created using the Tutor / Teach options. During each event of the cycle, the system
continuously monitors and reports the following control information:
•
Heater and thermocouple temperatures, Nozzle and diffuser flow rates, Force placement (removal)
procedures, Foot switch control, and Alarm conditions.
Event messages and temperature plotting graphically show the progress of a cycle.
The Cycle Start/Stop button is used to activate or terminate the process cycle. This
button will display a green background when the cycle is active or a gray background
when the cycle is not active. Clicking on this button when the background is green will
terminate the cycle.
Note:
D
URING THE CYCLE
,
THE OPERATOR MAY BE PROMPTED TO PRESS THE FOOT SWITCH BEFORE
ANY PROCESSING CAN CONTINUE
. S
OME EVENTS ARE DESIGNED TO ALLOW THE OPERATOR TO
PERFORM A MANUAL TASK
(
FINAL COMPONENT ALIGNMENT
).