Air-Vac DRS27, User Manual

Page: 165 / 384

DRS27 User’s Guide Chapter 4: Software Overview
0025.00.902 4-79
4.7 Camera Views
The camera screen is typically used for: component alignment or site inspection in conjunction with the
vision system camera. Or, site cleaning and viewing reflow with the direct view camera. It is typically
programmed in the inspection block, inspection vision system or inspection direct view. It can also be
manually activated on the run screen.
4.7.1 Vision System- Component Alignment
The camera screen will normally be activated automatically during the component replacement process.
It is programmed in the Inspection block, Inspection-Vision System. The message “Locate Target Site
Using Laser Pointer” will be shown on the run screen. Then the camera screen will be activated. Set-
tings of the view are set by the programmer. The operator has the ability to change settings for per-
sonal viewing preference.