Air-Vac DRS27, User Manual

Page: 196 / 384

DRS27 User’s Guide Chapter 5: Process Development Guide/Engineering Training
0027.00.902 5-20
•
Click on the Start icon (A).
•
The nozzle stabilization routine will run until the head TC reaches its target temperature of 90˚C (B).
NOTE: The head stabilization routine is critical for thermal repeatability.
•
The vision system will extend and the laser pointer teach position red dot will activate. The laser
should already be centered on the component.
•
The vision system will retract when you click on the yellow footswitch message.
•
The nozzle will then move downward and touch the component under force control and will retract
the programmed height (C).
NOTE: If the nozzle is not centered over the component, use the x/y wheels to correct this.
•
The thermal profile will begin execution and the graph will plot temperatures for the heaters (D) and
thermocouples (E).
A
C
B
D
E