Air-Vac DRS27, User Manual

Page: 259 / 384

DRS27 User’s Guide Chapter 7: Operator Training
0027.00.902 7 -3
7 Operator Training: Executing a Newly Created Profile
7.0 Overview: BGA Removal, Site Cleaning, Soldering
The following outline is an illustration of typical steps performed for BGA removal, site cleaning, and
soldering.
1- Register as an operator.
2- Select the appropriate profile.
3- Follow the instructions of the first (note detail) screen such as load nozzle, load PCB, and position
board supports.
Removal Program
1- Press the cycle start icon. Follow message prompts.
2- Automatic component removal.
3- Select “linking file” function to go to site cleaning program.
Site Cleaning Program
1- Press the cycle start icon. Follow message prompts.
2- Remove component nozzle with handling tools, install site cleaning nozzle.
3- Position nozzle tip at site, position direct view camera and flux site.
4- Move x/y wheels as solder melts to clean site.
5- Clean area and inspect.
6- Select “Linking File” function to go to the Soldering program.
Soldering Program
1- Remove site cleaning nozzle with handling tools and install component nozzle.
2- Follow message prompts..
WARNING!
The DRS machine is configured to run on the dedicated PC provided. The custom software is configured
for optimum machine performance in conjunction with the Windows® operating system. Additional
software loaded may affect performance and system integrity. The pc is not intended for personal/other
use. The operator should not be in any screen other than the Air-Vac DRS27 program.
The intent of this section is to assist the operator in becoming familiar with the DRS27 Hardware and
Software. In addition to this information, operator training should be supplemented by formal training from
a qualified individual.
The DRS27 software is Windows®-based. When the module is powered, it automatically boots to the
customized software. Extensive software knowledge is not required. The graphics interface is based on
symbols (icon) or word buttons for operator functions. Operators use the software to run pre-tested/pre-
approved profiles. Automatic steps and helpful prompt messages provide clear operation. Password
protection restricts access to high security areas.