Agilent Technologies InfiniiVision 3000 X-Series, Programmer'S Manual

Page: 547 / 1232

:POWer Commands
23
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 547
:POWer:SIGNals:VSTeady
(see page 1088 )
Command Syntax
:POWer:SIGNals:VSTeady <value>[suffix]
<value> ::= Expected steady state output Voltage value in NR3 format
[suffix] ::= {V | mV}
The :POWer:SIGNals:VSTeady command specifies the expected steady state
output DC voltage of the power supply.
This value is used along with the overshoot percentage to specify the
settling band for the transient response and to adjust the vertical scale of
the oscilloscope.
Query Syntax
:POWer:SIGNals:VSTeady?
The :POWer:SIGNals:VSTeady query returns the expected steady state
voltage setting.
Return Format
<value><NL>
<value> ::= Expected steady state output Voltage value in NR3 format
See Also
• ":POWer:ONOFf:APPLy" on page 530
• ":POWer:TRANsient:APPLy" on page 559
• ":POWer:SIGNals:AUTosetup" on page 541
• ":POWer:SIGNals:CYCLes" on page 542
• ":POWer:SIGNals:DURation" on page 543
• ":POWer:SIGNals:IEXPected" on page 544
• ":POWer:SIGNals:OVERshoot" on page 545
• ":POWer:SIGNals:VMAXimum" on page 546
• ":POWer:SIGNals:SOURce:CURRent<i>" on page 548
• ":POWer:SIGNals:SOURce:VOLTage<i>" on page 549