Agilent Technologies InfiniiVision 3000 X-Series, Programmer'S Manual

Page: 529 / 1232

:POWer Commands
23
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 529
:POWer:MODulation:TYPE
(see page 1088 )
Command Syntax
:POWer:MODulation:TYPE <modulation>
<modulation> ::= {VAVerage | ACRMs | VRATio | PERiod | FREQuency
| PWIDith | NWIDth | DUTYcycle | RISetime | FALLtime}
The :POWer:MODulation:TYPE command selects the type of measurement
to make in the modulation analysis:
• VAVerage
• ACRMs
• VRATio
• PERiod
• FREQuency
• PWIDth (positive pulse width)
• NWIDth (negative pulse width)
• DUTYcycle
• RISetime
• FALLtime
Query Syntax
:POWer:MODulation:TYPE?
The :POWer:MODulation:TYPE query returns the modulation type setting.
Return Format
<modulation><NL>
<modulation> ::= {VAV | ACRM | VRAT | PER | FREQ | PWID | NWID | DUTY
| RIS | FALL}
See Also • ":POWer:MODulation:SOURce" on page 528
• ":POWer:MODulation:APPLy" on page 527
• ":MEASure:VAVerage" on page 434
• ":MEASure:VRMS" on page 440
• ":MEASure:VRATio" on page 439
• ":MEASure:PERiod" on page 410
• ":MEASure:FREQuency" on page 403
• ":MEASure:PWIDth" on page 414
• ":MEASure:NWIDth" on page 406
• ":MEASure:DUTYcycle" on page 401
• ":MEASure:RISetime" on page 418
• ":MEASure:FALLtime" on page 402